Proof-reading (abbreviated list of technical parameters)

Hello!

I would be very very grateful for any corrections of the following list of technical parameters. It should be as short as possible to fit the graphical layout of the original (non-English) brochure. At the moment, it doesn't look very coherent.

Many thanks in advance!

Best,

P.

Technical parameters

Input and output:

• 2x analogue input for measurement of voltages and currents ranging from 100 mV (5 mA) above
• 2x digital impulse (counter) or binary input
• 2x digital output (also usable as sensor power switches end others)
• 1x USB port for communication with PC, Mini USB port
• 1x RS485 used for connection to intelligent sensors communicating by means of RS485 HART protocol
• logging interval: between 1 second and 24 hours (also suitable for pumping and slug tests)
• 8 MB Flash memory, meaning logging of at least 50,000 values; + micro SD memory card of your choice (support up to 8 GB)
• primary power cell 3.6V Li-SOCI2 (SAFT LSH20) with capacity of 13 Ah
• If we take the option to use two cells, the XYZ can run with hourly logs for 10 years without the necessity to replace the cells.
• possibility of external power supply (suitable for On-Line mode)
• temperatures ranging from -40 to +60 ° C, protection rating IP67
• housing dimensions 160 x 80 x 60 mm, made of polyurethane