0
USF Posted 14 years ago
Essay & Composition Writing
Could you please check this
Could you please check this if it is good English or not and correct my mistakes?
"By now, physical shape of a digital model of SEMATECH BTU/Bruce LPCVD system, with a finite element software program, has taken form, and it is time to define material characteristics of important parts. Here are the important parts of our model: inlet and outlet of gas flow, hot zones of the furnace and surfaces of wafers. Definable characteristics for these parts are: material, density, heat capacity and initial temperature. Specifically about injected gas, approximate portion of Silane and, in our case, nitrogen must be defined.
Boundary conditions are third part of parameter must be set before beginning of simulation. Proper temperature for deposition zone should be between 575 and 625, which in this case it has set to 620. The reaction chamber and mass flow of injected gas are two other conditions that respectively have been set to 0.3 torr and 200 sccm. Distribution of temperature from inlet and outlet to midsection of furnace assumed uniform, and both the inlet and outlet have been set to 250. In addition, the temperature of wafers themselves has been set to 615."
"By now, physical shape of a digital model of SEMATECH BTU/Bruce LPCVD system, with a finite element software program, has taken form, and it is time to define material characteristics of important parts. Here are the important parts of our model: inlet and outlet of gas flow, hot zones of the furnace and surfaces of wafers. Definable characteristics for these parts are: material, density, heat capacity and initial temperature. Specifically about injected gas, approximate portion of Silane and, in our case, nitrogen must be defined.
Boundary conditions are third part of parameter must be set before beginning of simulation. Proper temperature for deposition zone should be between 575 and 625, which in this case it has set to 620. The reaction chamber and mass flow of injected gas are two other conditions that respectively have been set to 0.3 torr and 200 sccm. Distribution of temperature from inlet and outlet to midsection of furnace assumed uniform, and both the inlet and outlet have been set to 250. In addition, the temperature of wafers themselves has been set to 615."
Top answer
First I thought perhaps in a simulation software, which we can set anything to what we desired, use "on" instead of "to". Do you think it is correct too? g.
- First I thought perhaps in a simulation software, which we can set anything to what we desired, use "on" instead of "to".
- Do you think it is correct too?
- g.
- set temperature on 20.
Get the Weekly English Kit 📬
New words, one handy idiom, and a 2-minute quiz — delivered to your inbox to keep your streak alive.
4 Answers
0
First I thought perhaps in a simulation software, which we can set anything to what we desired, use "on" instead of "to". Do you think it is correct too? e.g. set temperature on 20.
00
0
By now, the physical shape of a digitally modeled SEMATECH BTU Bruce LPCVD system has been created with a finite-element software program, and it is time to define the characteristics of the materials of the important parts. Here are the important parts of our model: inlet and outlet of gas flow, hot zones of the furnace and surfaces of wafers. Definable characteristics for these parts are materia
00
Thanks enoon 
you again. I think I should send all my paper to you at the beginning.
you again. I think I should send all my paper to you at the beginning. 0
Related Questions